Stainless Steel Pipe Tee Equal Or Reducing Tee Butt Welding Pipe Fittings ANSI B16.9
"Zheheng steel" specializes in producing stainless steel elbow, equal tee, reducing tee, reducing pipe (eccentric, concentric), flanging, pipe cap, flange.This product strictly follows ASTM B16.9/B16.5,GB/T12459,GB/T12459, SH3408, SH3409, DIN, JIS and other standards.The materials used are 304,304 L, 321,316,316 L, 317L,310S and other stainless steel materials.
Product range:
size : 1/2"-36" sch10s -schxxs
Material : Stainless Steel:
WP321,304,304L,316,316L , 310S,S32205, S32507
Nickel alloy Steel:
C276,600,625,800,825,800H
STANDARD : ASTM / JIS / DIN / BS / GB/GOST
TYPE : equal tee, reducing tee or according to drawing
APPLICATION : Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
ODM&OEM We can also produce according to material proviede or appointed by customer
Classification and application of stainless steel tee:
The stainless steel tee is a pipe fitting used at the branch of the pipeline. For the manufacture of tees using seamless tubes, the currently commonly used processes are hydraulic bulging and hot press forming.
Stainless steel tee
The hydraulic bulging of the stainless steel tee is a forming process that expands the branch pipe through the axial compensation of the metal material. The process is to use a special hydraulic machine to inject liquid into the tube blank equal to the diameter of the tee, and squeeze the tube blank through the centering movement of the two horizontal side cylinders of the hydraulic machine. After the tube blank is extruded, the volume becomes smaller and the tube blank The volume of the liquid increases and the pressure increases with the volume of the tube blank. When the pressure required to expand the stainless steel tee branch pipe is reached, the metal material flows along the cavity of the mold under the double action of the liquid pressure in the side cylinder and the tube blank to expand the branch pipe .
The hydraulic bulging process of the stainless steel tee can be formed at one time, and the production efficiency is higher; the wall thickness of the main pipe and the shoulder of the stainless steel tee are increased.
Due to the large tonnage of the equipment required for the hydraulic bulging process of stainless steel tees, it is currently mainly used in the manufacture of stainless steel tees with standard wall thickness less than DN400 in China. The applicable forming materials are low carbon steel, low alloy steel and stainless steel with relatively low cold work hardening tendency, including some non-ferrous metal materials such as copper, aluminum and titanium.
According to manufacturing standards, it can be divided into national standard, electric standard, water standard, American standard, German standard, Japanese standard, Russian standard, etc., as follows: GB / T12459, GB / T13401, ASME B16.9, SH3408, SH3409, HG / T21635, DL / T 695, SY / T 0510, DIN 2615
Dimensions of Straight Tees and Crosses
| Nominal Pipe Size (NPS) | Outside Diameter at Bevel | Center-to-End |
| Run, C | Outlet, |
| M |
| [Notes ⑴ and ⑵] |
| 1/2” | 21.3 | 25 | 25 |
| 3/4” | 26.7 | 29 | 29 |
| 1 | 33.4 | 38 | 38 |
| 1-1/4” | 42.2 | 48 | 48 |
| 1-1/2” | 48.3 | 57 | 57 |
| 2 | 60.3 | 64 | 64 |
| 2-1/2” | 73 | 76 | 76 |
| 3 | 88.9 | 86 | 86 |
| 3-1/2” | 101.6 | 95 | 95 |
| 4 | 114.3 | 105 | 105 |
| 5 | 141.3 | 124 | 124 |
| 6 | 168.3 | 143 | 143 |
| 8 | 219.1 | 178 | 178 |
| 10 | 273 | 216 | 216 |
| 12 | 323.8 | 254 | 254 |
| 14 | 355.6 | 279 | 279 |
| 16 | 406.4 | 305 | 305 |
| 18 | 457 | 343 | 343 |
| 20 | 508 | 381 | 381 |
| 22 | 559 | 419 | 419 |
| 24 | 610 | 432 | 432 |
| 26 | 660 | 495 | 495 |
| 28 | 711 | 521 | 521 |
| 30 | 762 | 559 | 559 |
| 32 | 813 | 597 | 597 |
| 34 | 864 | 635 | 635 |
| 36 | 914 | 673 | 673 |
| 38 | 965 | 711 | 711 |
| 40 | 1 016 | 749 | 749 |
| 42 | 1 067 | 762 | 711 |
| 44 | 1 118 | 813 | 762 |
| 46 | 1 168 | 851 | 800 |
| 48 | 1 219 | 889 | 838 |
GENERAL NOTE: All dimensions are in millimeters.
NOTES:
(1)Outlet dimension M for NPS 26 and larger is recommended but not required.
(2)Dimensions applicable to crosses NPS 24 and smaller.
Products show:
Product Tags:
|
|
Welded Sch40s ANSI B16.9 Stainless Steel Pipe Tee Images
|
